installation guide and user manualroom-sealed built-in gas-fireplace40 010 52702 37SILENCEFEELINGWHISPERSPECTRA NOVACADRA NOVAMISTYSaturnus 8 NL-8448
UK/IRL 17UK/IRL 164. INSTRUCTIONS FOR INSTALLATION4.1 Gas connection1. Installation pipes should be in accordance with BS 6891. Pipe workfrom the mete
UK/IRL 19UK/IRL 184.2 Preparing the appliances Widescreen and Whisper (continuing)4. Take the box with the log set out of the combustion chamber.5. Pl
UK/IRL 214.3 Preparing the appliance Misty (continuing)4. Take the box with the log set out of the combustion chamber.5. Place the right flue restrict
UK/IRL 23UK/IRL 224.4 Preparing the appliances Spectra Nova/Cadra Nova (continuing)4. Take the box with the log set out of the combustion chamber.5. P
UK/IRL 25UK/IRL 244.5 Fitting the firebox (continuing)8. Spread, the bags of embers (imitation ashes) provide with theappliance over the burner tray.
UK/IRL 27UK/IRLUK/IRL5. INSTALLATION OF THE FLUE 5.1 Connections with use of concentric duct material- Build the system starting from the appliance on
UK/IRL 29UK/IRL 28UK/IRLUK/IRL5.2 Connection onto an existing chimney (continuing)5. Fixing the chimney sealing plate (D) and place the 150 mmgrommet
UK/IRL 31UK/IRL 30UK/IRLUK/IRL3. Connect the wires to the gas valve (see fig. 22).4. Check that there are batteries in the transmitter. See "Rep
UK/IRL 33UK/IRL 32UK/IRLUK/IRL6.3 Functional balanced flue check1. Set the appliance on max. input.2. Verify the flame picture, this means no flames a
UK/IRL 35UK/IRL 348. SERVICINGTo ensure safe, efficient operation of the appliance, it is necessary tocarry out routine servicing at regular intervals
1CONTENTS1. INTRODUCTION 22. SAFETY INSTRUCTIONS 33. INSTALLATION REQUIREMENTS 53.1 Builders opening and surround 53.2 Requirements outlet and exha
UK/IRL 37UK/IRL 368.1.4 Burner tray assembly1. Remove the front, glass, log set, grid and burner tray cover.2. Break the gas supply at the control val
UK/IRL 39UK/IRL 38UK/IRLUK/IRL8.1.7 Combustion testA BS7967 combustion analysis check should be carried out using ananalyser to BS7927 positioned in t
Whisper Feeling Silence Misty Spectra CadraNova NovaDescription Company Company Company Company Company Company part part part part part partSurro
Country UK/IRL UK/IRLCategory II2H3+II2H3+Model type C11 0f C31 C11 0f C31Heat input Hi kW 7.5 7.5Efficiency class 2 2NOX class 4 4Type of gas G20 G30
UK/IRL 45UK/IRL 44UK/IRLUK/IRLUK/IRLUSER GUIDE8.3 TECHNICAL DATARoundscreen MistyCountry UK/IRL UK/IRLCategory II2H3+II2H3+Model type C11 0f C31 C11
UK/IRL 47UK/IRL 46IMPORTANT A suitable Fireguard conforming to BS6539 and BS6778 should be usedwith this appliance to protect children, the elderly or
UK/IRL 49UK/IRL 48Knob AThe { is the OFF position preventing any gas from passing through thecontrol valve to either the pilot burner or to the main b
UK/IRL 51UK/IRL 5010.4.1 To light1. Push in and turn the control knob (A) from { anticlockwise tothe setting (small flame). You will hear a ignition
UK/IRL 53UK/IRL 5210.4.3 Setting the right transmission codehe receiver has to learn the code from the transmitter, which is alreadydone at the factor
UK/IRL 55UK/IRL 54UK/IRLUK/IRLUK/IRLUK/IRL12. DISPOSAL OF THE PACKAGINGAND THE APPLIANCEThe appliance packaging is recyclable. The packaging could inc
UK/IRL 2UK/IRL 31. INTRODUCTIONNote: these instructions should be read carefully and retained forfuture reference. Please leave these instructions wit
UK/IRL 5UK/IRL 4Building Regulations and Standards issued as relevant by theDepartment of the Environment or the Scottish DevelopmentDepartment.In the
LMFICBAJEDGKHBuilders opening (mm) Feeling Silence Whisper Spectra Cadra MistyNova NovaA Opening width* 960 960 780 780 680 710B Opening height* 649 6
UK/IRL 9UK/IRL 83.2 Flue requirementsThe appliance is of the type C11/C31. The appliance will need to besupplied with the approved flue pipes and term
UK/IRL01234560XXXXXXXXXXXXXXXXXXXXXXXXXXXX1 30 0 0 0 0 0 0/X*23030 0 0 0 0 03 454530 0 0 0 04 454530 0 0 0 05 5050454530 0 06 5050454530 0 07 60
UK/IRL 133.2 Flue requirements (continuing)3.2.1 Terminal positionVerify if the required terminal position meets the local installationregulations reg
Table 6UK/IRL 15UK/IRL 14Dimension Terminal position Balanced flue room sealed(kW input 7.5 kW expressed in net) Natural draughtA Direct below an open
Comments to this Manuals